Construction Hoist Elevator Code Enforcement (Do’s and Don’ts)
Construction hoist and elevation equipment of any form have well specified construction hoist codes of handling. This is because whenever such equipment is involved in an accident, it is likely to cause a lot of damage. The complete rules on handling of such equipment are implemented and cited in the American National Safety Code for Elevators and Dumbwaiters often known as ASME. For any question you may have, feel free to contact the friendly sales staff at Metro Elevator Co., Inc. The reason behind construction hoist codes enforcement is to provide vital information on safety standards used during installation, operation, repair, inspection or construction of elevators and their related equipment. Any breach of these rules will result in severe measures that include bringing down of the whole structure as well as paying a stated fine. In case of an elevator hoisting equipment malfunction or accident, there are rules that will guide you on what to do or not to do. First of all, when an accident occurs, it is supposed to be reported to the property owner or agent within 24 hours. The operation certificate is then revoked until the equipment has been certified to be able to operate again. Failure to report an accident on time will result in penalization since it will be a breach of elevation and hoisting equipment rules. Nobody should remove any part of the equipment, whether damaged or not until the permissions to do that has been given by a chief elevator inspector. For permanently installed industrial manlifts, each of them should be used according to their specifications. The only persons allowed in such elevating and hoisting equipment are those designated as trained operators for loading and unloading the goods. Hoist operators are also required to report any unusual activities to the relevant authorities. These can turn out to be useful since catastrophes start from simple unusual signs on equipment. The earlier a fault is reported or detected, the easier it is to be repaired. An observant and sensible person who follows construction hoist codes can prevent elevator injuries not only to themselves but also to the other passengers in the elevator. Some of the dos and don’ts of the elevators during their function include, do not use an elevator in case of an emergency. This is because events such as power faults can easily occur and lock people inside. Construction hoists and industrial lifts are not for children and it is advisable to always discourage them from playing inside an elevator. A hoist should also not be overloaded since it can result to a malfunction. It is the operator’s responsibility to make sure that objects are not placed on the doorways to keep an elevator open but instead passengers should advise the operator of their intentions or use the elevator buttons if the hoist does not require an operator. In case of an event whereby a passenger is trapped in a hoist, the hoist’s intercom system shall be a means of communications with anyone at the base landing or other upper landings When dismantling a construction hoist, ensure that correct mechanisms are followed. It is also a requirement that the dismantling process should be done using specialized equipment such as a crane or gin pole. The people who are to take on the dismantling process should be elevator and hoist equipment professionals. Ensure that there are no people or other vulnerable material on the way before a dismantling process begins and all the surrounding power sources should be put off. If you happen to be in the market for leasing or purchasing a construction hoist or industrial lift, give Metro elevator a call at 1-800-Hoists-0 or simply click the button below.